Skip to main content

Publications

2022

  • Goh, W.P., Sinha, K., Nere, N.K., Ho, R., Bordawekar, S., Sheikh, A,. Ghadiri, M. 2022. Breakage assessment of lath-like crystals in a novel laboratory-scale agitated filter bed dryer Pharmaceutical Research 39 (12), 3209-3221.
  • Scott, L., Borissova, A., Di Renzo, A., Ghadiri, M. 2022. Application of coarse-graining for large scale simulation of fluid and particle motion in spiral jet mill by CFD-DEM.  Powder Technology 411, 117962.
  • Ghadiri, M., Liu, L., Hassanpour, A., Nadimi. S., 2022. Special Issue of the 16th European Symposium on Comminution and Classification, ESCC 2019. Powder Technology. 399.

2021

  • Alfano, F.O., Di Renzo, A., Di Maio, F.P. and Ghadiri, M. 2021. Computational analysis of triboelectrification due to aerodynamic powder dispersion. Powder Technology. 382, pp.491–504.
  • Bhonsale, S., Scott, L., Ghadiri, M. and Van Impe, J. 2021. Numerical Simulation of Particle Dynamics in a Spiral Jet Mill via Coupled CFD-DEM. Pharmaceutics. 13(7).
  • Bonakdar, T., Ali, M. and Ghadiri, M. 2021. Particle breakability assessment using an Aero S disperser. International Journal of Pharmaceutics. 597(120365).
  • Calvert, G., Ahmadian, H. and Ghadiri, M. 2021. Analysis of contact force distribution in a moving granule bed subjected to shear deformation by a set of rollers. Advanced Powder Technology. 32(8), pp.3016–3022.
  • Goh, W.P., Sanavia, A.M. and Ghadiri, M. 2021. Effect of Mixer Type on Particle Coating by Magnesium Stearate for Friction and Adhesion Modification. Pharmaceutics. 13.
  • Hare, C., Ghadiri, M. and Wu, C.-Y. 2021. Discrete element modelling of ribbon milling: A comparison of approaches. Powder Technology. 388, pp.63–69.
  • Nan, W., Pasha, M. and Ghadiri, M. 2021. Rheology of a dense granular bed penetrated by a rotating impeller. Powder Technology. 386, pp.60–69.
  • Nezamabadi, S., Ghadiri, M., Delenne, J.Y. and Radjai, F. 2021. Modelling the compaction of plastic particle packings. Computational Particle Mechanics.
  • Sardar, S., Kale, G. and Ghadiri, M. 2021. Microstructure and impedance spectroscopy of high density holmium hafnate (Ho2Hf2O7) from nanoparticulate compacts. Materials Science and Engineering: B. 265(114989).
  • Scott, L., Borissova, A., Burns, A. and Ghadiri, M. 2021. Influence of holdup on gas and particle flow patterns in a spiral jet mill. Powder Technology. 377, pp.233–243.
  • Zafar, U., Hare, C., Hassanpour, A. and Ghadiri, M. 2021. Assessing powder flowability at low stresses using ball indentation method: Evaluation of constraint factor. Powder Technology. 387, pp.287–294.

2020

  • Ahmed, M., Pasha, M., Nan, W. and Ghadiri, M. 2020. A simple method for assessing powder spreadability for additive manufacturing. Powder Technology. 367, pp.671–679.
  • Ali, M., Mahmud, T., Heggs, P.J. and Ghadiri, M. 2020. Zonal modelling of a counter-current spray drying tower. Chemical Engineering Research and Design. 155, pp.180–199.
  • Ge, R., Ghadiri, M., Bonakdar, T., Zheng, Q., Zhou, Z., Larson, I. and Hapgood, K. 2020. Deformation of 3D printed agglomerates: Multiscale experimental tests and DEM simulation. Chemical Engineering Science. 217(115526).
  • Ghadiri, M., Pasha, M., Nan, W., Hare, C., Vivacqua, V., Zafar, U., Nezamabadi, S., Lopez, A., Pasha, M. and Nadimi, S. 2020. Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis. KONA Powder and Particle Journal. 37, pp.3–18.
  • Li, B., Wang, Z., Vivacqua, V., Ghadiri, M., Wang, J., Zhang, W., Wang, D., Liu, H., Sun, Z. and Wang, Z. 2020. Drop-interface electrocoalescence mode transition under a direct current electric field. Chemical Engineering Science. 213.
  • López, A., Vivacqua, V., Hammond, R. and Ghadiri, M. 2020. Analysis of screw feeding of faceted particles by discrete element method. Powder Technology. 367, pp.474–486.
  • Nan, W., Pasha, M. and Ghadiri, M. 2020. Numerical simulation of particle flow and segregation during roller spreading process in additive manufacturing. Powder Technology. 364, pp.811–821.
  • Nan, W., Pasha, M. and Ghadiri, M. 2020. Effect of gas-particle interaction on roller spreading process in additive manufacturing. Powder Technology. 372, pp.466–476.
  • Pasha, M., Hekiem, N.L., Jia, X. and Ghadiri, M. 2020. Prediction of flowability of cohesive powder mixtures at high strain rate conditions by discrete element method. Powder Technology. 372, pp.59–67.
  • Saifoori, S., Goh, W.P., Ali, M. and Ghadiri, M. 2020. Impact breakage of acicular crystals. Powder Technology. 361, pp.651–662.
  • Sardar, S., Kale, G. and Ghadiri, M. 2020. Influence of processing conditions on the ionic conductivity of holmium zirconate (Ho2Zr2O7). Ceramics International. 46(8 Part B), pp.11508–11514.
  • Sardar, S., Kale, G., Cespedes, O. and Ghadiri, M. 2020. Environmentally sustainable facile synthesis of nanocrystalline holmium hafnate (Ho2Hf2O7): Promising new oxide-ion conducting solid electrolyte. SN Applied Sciences. 2(4).

2019

  • Saifoori, S., Goh, W.P., Ali, M. & Ghadiri, M. (2019). Impact breakage of acicular crystals. Powder Technol. DOI:https://doi.org/10.1016/j.powtec.2019.11.061
  • Goh, W.P., Ali, M., Sinha, K., Nere, N., Ho, R., Bordawekar, S., Sheikh, A. & Ghadiri, M. (2019). Assessment of impact breakage of carbamazepine dihydrate due to aerodynamic dispersion. Int. J. Pharm. DOI:https://doi.org/10.1016/j.ijpharm.2019.118780
  • Sardar, S., Kale, G., Ghadiri, M., Cespedes, O., (2019). Structural study of holmium zirconate nanoparticles obtained through carbon neutral sol-gel process. Thermochimica Acta. DOI: https://doi.org/10.1016/j.tca.2019.04.003
  • Nan, W., & Ghadiri, M. (2019). Numerical simulation of powder flow during spreading in additive manufacturing. Powder Technology, 342, 801-807. DOI: https://doi.org/10.1016/j.powtec.2018.10.056
  • Vivacqua, V., López, A., Hammond, R., & Ghadiri, M. (2019). DEM analysis of the effect of particle shape, cohesion and strain rate on powder rheometry. Powder Technology, 342, 653-663. DOI: http://doi.org/10.1016/j.powtec.2018.10.034
  • Yang, D., Sun, Y., Ghadiri, M., Wu, H., Qiao, H., He, L., Luo, X., Lü, Y. 2019. Effect of hydrolyzed polyacrylamide used in polymer flooding on droplet–interface electro-coalescence: Variation of critical electric field strength of partial coalescence. Separation and Purification Technology, 227, 115737. https://doi.org/10.1016/j.seppur.2019.115737
  • Li, B., Vivacqua, V., Wang, J., Wang, Z., Sun, Z., Wang, Z., Ghadiri, M. 2019. Electrocoalescence of water droplets in sunflower oil using a novel electrode geometry. Chemical Engineering Research and Design, 152,226-241. https://doi.org/10.1016/j.cherd.2019.09.034

2018

  • Nan, W., Pasha, M., Bonakdar, T., Lopez, A., Zafar, U., Nadimi, S. and Ghadiri, M., (2018). Jamming during particle spreading in additive manufacturing. Powder Technology. DOI: https://doi.org/10.1016/j.powtec.2018.07.030
  • Vivacqua, V. and Ghadiri, M., (2018). Modelling of auto-agglomeration of cohesive powders. Chemical Engineering Research and Design, 133, pp.137-141. DOI: https://doi.org/10.1016/j.cherd.2018.03.018
  • Zafar, U., Alfano, F. and Ghadiri, M., (2018). Evaluation of a New Dispersion Technique for Assessing Triboelectric Charging of Powders. International journal of pharmaceutics, 543(1-2), pp.151-159. DOI: https://doi.org/10.1016/j.ijpharm.2018.03.049
  • Hare, C., Bonakdar, T., Ghadiri, M. and Strong, J., (2018). Impact breakage of pharmaceutical tablets. International journal of pharmaceutics, 536(1), pp.370-376. DOI: https://doi.org/10.1016/j.ijpharm.2017.11.066
  • Rahayu, S., Forrester, J. S., Kale, G. M., & Ghadiri, M. (2018). Promising solid electrolyte material for an IT-SOFC: Crystal structure of the cerium gadolinium holmium oxide Ce₀.₈Gd₀.₁Ho₀.₁O₁.₉ between 295 and 1023 K. Acta Crystallographica Section C: Structural Chemistry, 74(2), 236-239. DOI: https://doi.org/10.1107/S2053229617017946
  • Ge, R., Ghadiri, M., Bonakdar, T., Zhou, Z., Larson, I., & Hapgood, K. (2018). Experimental study of the deformation and breakage of 3D printed agglomerates: Effects of packing density and inter-particle bond strength. Powder Technology, 340, 299-310. DOI: http://doi.org/10.1016/j.powtec.2018.09.029
  • Bonakdar, T., & Ghadiri, M. (2018). Analysis of pin milling of pharmaceutical materials. International Journal of Pharmaceutics, 552(1-2), 394-400. DOI: http://doi.org/10.1016/j.ijpharm.2018.09.068
  • Alizadeh, M., Asachi, M., Ghadiri, M., Bayly, A., & Hassanpour, A. (2018). A methodology for calibration of DEM input parameters in simulation of segregation of powder mixtures, a special focus on adhesion. Powder Technology, 339, 789-800. DOI: http://doi.org/10.1016/j.powtec.2018.08.028
  • Nan, W., Pasha, M., Bonakdar, T., Lopez, A., Zafar, U., Nadimi, S., & Ghadiri, M. (2018). Jamming during particle spreading in additive manufacturing. Powder Technology, 338, 253-262. DOI: http://doi.org/10.1016/j.powtec.2018.07.030
  • Asachi, M., Hassanpour, A., Ghadiri, M., & Bayly, A. (2018). Experimental evaluation of the effect of particle properties on the segregation of ternary powder mixtures. Powder Technology, 336, 240-254. DOI: http://doi.org/10.1016/j.powtec.2018.05.017
  • Yang, D., Ghadiri, M., Sun, Y., He, L., Luo, X., & Lü, Y. (2018). Critical electric field strength for partial coalescence of droplets on oil–water interface under DC electric field. Chemical Engineering Research and Design, 136, 83-93. DOI: http://doi.org/10.1016/j.cherd.2018.05.004

2017

  • Nan, W., Ghadiri, M. and Wang, Y., (2017). Analysis of powder rheometry of FT4: Effect of air flow. Chemical Engineering Science, 162, pp.141-151. DOI: https://doi.org/10.1016/j.ces.2017.01.002
  • Nan, W., Ghadiri, M. and Wang, Y., (2017). Analysis of powder rheometry of FT4: Effect of particle shape. Chemical Engineering Science, 173, pp.374-383. DOI: https://doi.org/10.1016/j.ces.2017.08.004
  • Pasha, M., Hare, C., Ghadiri, M., Gunadi, A. and Piccione, P.M., (2017). Inter-particle coating variability in a rotary batch seed coater. Chemical Engineering Research and Design, 120, pp.92-101. DOI: https://doi.org/10.1016/j.cherd.2017.01.033
  • Ali, M., Mahmud, T., Heggs, P., Ghadiri, M., Bayly, A., Crosby, M., Ahmadian, H., Martindejuan, L. and Alam, Z., (2017). Residence time distribution of glass ballotini in isothermal swirling flows in a counter-current spray drying tower. Powder Technology, 305, pp.809-815. DOI: https://doi.org/10.1016/j.powtec.2016.10.023
  • Ge, R., Ghadiri, M., Bonakdar, T. and Hapgood, K., (2017). 3D printed agglomerates for granule breakage tests. Powder Technology, 306, pp.103-112. DOI: https://doi.org/10.1016/j.powtec.2016.10.070
  • Ali, M., Mahmud, T., Heggs, P.J., Ghadiri, M., Bayly, A., Ahmadian, H. and Martin de Juan, L., (2017). CFD modeling of a pilot-scale countercurrent spray drying tower for the manufacture of detergent powder. Drying technology, 35(3), pp.281-299. DOI: https://doi.org/10.1080/07373937.2016.1163576
  • Zafar, U., Hare, C., Hassanpour, A. and Ghadiri, M., (2017). Ball indentation on powder beds for assessing powder flowability: Analysis of operation window. Powder Technology, 310, pp.300-306. DOI: https://doi.org/10.1016/j.powtec.2017.01.047
  • Chen, Q., Zafar, U., Ghadiri, M. and Bi, J., (2017). Assessment of surface caking of powders using the ball indentation method. International journal of pharmaceutics, 521(1-2), pp.61-68. DOI: https://doi.org/10.1016/j.ijpharm.2017.02.033
  • Zafar, U., Vivacqua, V., Calvert, G., Ghadiri, M. and Cleaver, J.A.S., (2017). A review of bulk powder caking. Powder Technology, 313, pp.389-401. DOI: https://doi.org/10.1016/j.powtec.2017.02.024
  • Alizadeh, M., Hassanpour, A., Pasha, M., Ghadiri, M. and Bayly, A., (2017). The effect of particle shape on predicted segregation in binary powder mixtures. Powder Technology, 319, pp.313-322. DOI: https://doi.org/10.1016/j.powtec.2017.06.059
  • Ali, M. and Ghadiri, M., (2017). Analysis of triboelectric charging of particles due to aerodynamic dispersion by a pulse of pressurised air jet. Advanced Powder Technology, 28(10), pp.2735-2740. DOI: https://doi.org/10.1016/j.apt.2017.07.026
  • Asachi, M., Hassanpour, A., Ghadiri, M. and Bayly, A., (2017). Assessment of Near-Infrared (NIR) spectroscopy for segregation measurement of low content level ingredients. Powder Technology, 320, pp.143-154. DOI: https://doi.org/10.1016/j.powtec.2017.07.003
  • Li, B., Vivacqua, V., Ghadiri, M., Sun, Z., Wang, Z. and Li, X., (2017). Droplet deformation under pulsatile electric fields. Chemical Engineering Research and Design, 127, pp.180-188. DOI: https://doi.org/10.1016/j.cherd.2017.09.024
  • Fulchini, F., Zafar, U., Hare, C., Ghadiri, M., Tantawy, H., Ahmadian, H. and Poletto, M., (2017). Relationship between surface area coverage of flow-aids and flowability of cohesive particles. Powder Technology, 322, pp.417-427. DOI: https://doi.org/10.1016/j.powtec.2017.09.013
  • Pasha, M., Ghadiri, M., Gunadi, A. and Piccione, P.M., (2017). Distinct element analysis of inter-particle coating variability in a batch seed coater. In EPJ Web of Conferences (Vol. 140, p. 15035). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714015035
  • Hare, C. and Ghadiri, M., (2017). Stress and strain rate analysis of the FT4 Powder Rheometer. In EPJ Web of Conferences(Vol. 140, p. 03034). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714003034
  • Nan, W., Vivacqua, V., Ghadiri, M. and Wang, Y., (2017). Numerical analysis of air effect on the powder flow dynamics in the FT4 Powder Rheometer. In EPJ Web of Conferences(Vol. 140, p. 03036). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714003036
  • Goh, W.P., Ghadiri, M., Muller, F., Sinha, K., Nere, N., Ho, R., Bordawekar, S. and Sheikh, A., (2017). Stress analysis of an agitated particle bed with different particle aspect ratios by the discrete element method. In EPJ Web of Conferences (Vol. 140, p. 06022). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714006022
  • Behjani, M.A., Hassanpour, A., Ghadiri, M. and Bayly, A., (2017). Numerical analysis of the effect of particle shape and adhesion on the segregation of powder mixtures. In EPJ Web of Conferences (Vol. 140, p. 06024). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714006024
  • Fulchini, F., Nan, W., Ghadiri, M., Panah, M.Y., Bertholin, S., Amblard, B., Cloupet, A. and Gauthier, T., (2017). CFD-DEM Analysis of Particle Attrition in a Jet in a Fluidised Bed. In EPJ Web of Conferences (Vol. 140, p. 07017). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714007017
  • Dogbe, S., Ghadiri, M., Hassanpour, A., Hare, C., Wilson, D., Storey, R. and Crosley, I., (2017). Fluid-particle energy transfer in spiral jet milling. In EPJ Web of Conferences (Vol. 140, p. 09040). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714009040
  • Asachi, M., Hassanpour, A., Ghadiri, M. and Bayly, A., (2017). Analysis of Minor Component Segregation in Ternary Powder Mixtures. In EPJ Web of Conferences (Vol. 140, p. 13013). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714013013
  • Bonakdar, T. and Ghadiri, M., (2017). Effect of Structure on Strength of Agglomerates using Distinct Element Method. In EPJ Web of Conferences (Vol. 140, p. 15015). EDP Sciences. DOI: https://doi.org/10.1051/epjconf/201714015015

2016

  • Bonakdar, T., Ali, M., Dogbe, S., Ghadiri, M., & Tinke, A. (2016). A Method for Grindability Testing Using the Scirocco Disperser. International Journal of Pharmaceutics, 501(1-2), 65-74. doi:10.1016/j.ijpharm.2016.01.052
  • Bonakdar, T., Ghadiri, M., Ahmadian, H., Martin de Juan, L., Xu, D., Tantawy, H., & Smith, D. (2016). Impact attrition of spray-dried burkeite particles. Powder Technology, 304, 2-7. doi:10.1016/j.powtec.2016.08.024
  • Hare, C., Ghadiri, M., Guillard, N., Bosworth, T., & Egan, G. (2016). Analysis of milling of dry compacted ribbons by distinct element method. Chemical Engineering Science, 149, 204-214. doi:10.1016/j.ces.2016.04.041
  • Pasha, M., Hare, C., Ghadiri, M., Gunadi, A., & Piccione, P. M. (2016). Effect of particle shape on flow in discrete element method simulation of a rotary batch seed coater. Powder Technology, 296, 29-36. doi:10.1016/j.powtec.2015.10.055
  • Saleh, K., Hassanpour, A., Ghadiri, M., & Salman, A. (2016). Special issue: Foreword – 7th International Granulation Workshop 2015. Chemical Engineering Research and Design, 110, 1. doi:10.1016/j.cherd.2016.06.001
  • Vivacqua, V., Ghadiri, M., Abdullah, A. M., Hassanpour, A., Al-Marri, M. J., Azzopardi, B., Hewakandamby, B., & Kermani, B. (2016). Linear Dynamics Modelling of Droplet Deformation in a Pulsatile Electric Field. Chemical Engineering Research and Design, 114, 162-170. doi:10.1016/j.cherd.2016.08.015
  • Vivacqua, V., Ghadiri, M., Abdullah, A. M., Hassanpour, A., Al-Marri, M. J., Azzopardi, B., Hewakandamby, B., & Kermani, B. (2016). Analysis of partial electrocoalescence by Level-Set and finite element methods. Chemical Engineering Research and Design, 114, 180-189. doi:10.1016/j.cherd.2016.08.019

2015

  • Ali, M., Bonakdar, T., Ghadiri, M., & Tinke, A. (2015). Particle Breakage in a Scirocco Disperser. Powder Technology, 285, 138-145. doi:10.1016/j.powtec.2015.06.048
  • Ali, M., Mahmud, T., Heggs, P. J., Ghadiri, M., Bayly, A., Ahmadian, H., & de Juan, L. M. (2015). CFD Simulation of a Counter-current Spray Drying Tower with Stochastic Treatment of Particle-wall Collision. In Procedia Engineering Vol. 102 (pp. 1284-1294). Beijing, China: Elsevier. doi:10.1016/j.proeng.2015.01.259
  • Bonakdar, T., Ghadiri, M., Ahmadian, H., & Bach, P. (2015). Impact Strength Distribution of Placebo Enzyme Granules. Powder Technology, 285, 68-73. doi:10.1016/j.powtec.2015.04.064
  • Chauruka, S. R., Hassanpour, A., Brydson, R., Roberts, K. J., Ghadiri, M., & Stitt, H. (2015). Effect of mill type on the size reduction and phase transformation of gamma alumina. Chemical Engineering Science, 134, 774-783. doi:10.1016/j.ces.2015.06.004
  • Hare, C., & Ghadiri, M. (2015). Attrition of Paracetamol and Aspirin under bulk shear deformation. Chemical Engineering Science, 125, 13-19. doi:10.1016/j.ces.2014.10.027
  • Hare, C. L., Zafar, U., Ghadiri, M., Freeman, T., Clayton, J., & Murtagh, M. (2015). Analysis of the dynamics of the FT4 powder rheometer. Powder Technology, 285, 123-127. doi:10.1016/j.powtec.2015.04.039
  • Hassanpour, A., & Ghadiri, M. (2015). Discrete Element Method (DEM) Simulation of Powder Mixing Process. In P. J. Cullen, R. J. Romanach, N. Abatzoglou, & C. D. Rielly (Eds.), Pharmaceutical Blending and Mixing (1 ed., pp. 459-477). John Wiley & Sons, Ltd. doi:10.1002/9781118682692.ch17
  • Ku, N., Hare, C. L., Ghadiri, M., Murtagh, M. J., & Haber, R. A. (2015). Effect of mechanical vibration on the size and microstructure of titania granules produced by auto-granulation. Powder Technology, 286, 223-229. doi:10.1016/j.powtec.2015.05.041
  • Ku, N., Hare, C. L., Ghadiri, M., Murtagh, M. J., Oram, P., & Haber, R. A. (2015). Auto-granulation of fine cohesive powder by mechanical vibration. Procedia Engineering, 102, 72-80. doi:10.1016/j.proeng.2015.01.108
  • Mhatre, S., Vivacqua, V., Ghadiri, M., Abdullah, A. M., Al-Marri, M. J., Hassanpour, A., Hewakandamby, B., Azzopardi, B., & Kermani, B. (2015). Electrostatic phase separation: A review. Chemical Engineering Research and Design, 96, 177-195. doi:10.1016/j.cherd.2015.02.012
  • Pasha, M., Hare, C., Hassanpour, A., & Ghadiri, M. (2015). Numerical analysis of strain rate sensitivity in ball indentation on cohesive powder Beds. Chemical Engineering Science, 123, 92-98. doi:10.1016/j.ces.2014.10.026
  • Pasha, M., Hassanpour, A., Ahmadian, H., Tan, H. S., Bayly, A., & Ghadiri, M. (2015). A comparative analysis of particle tracking in a mixer by discrete element method and positron emission particle tracking. Powder Technology, 270(Part B), 569-574. doi:10.1016/j.powtec.2014.09.007
  • Vivacqua, V., Mhatre, S., Ghadiri, M., Abdullah, A. M., Hassanpour, A., Al-Marri, M. J., Hewakandamby, B., & Kermani, B. (2015). Electrocoalescence of water drop trains in oil under constant and pulsatile electric fields. Chemical Engineering Research and Design, 104, 658-668. doi:10.1016/j.cherd.2015.10.006
  • Zafar, U., Hare, C., Calvert, G., Ghadiri, M., Girimonte, R., Formisani, B., Quintanilla, M. A. S., & Valverde, J. M. (2015). Comparison of cohesive powder flowability measured by Schulze Shear Cell, Raining Bed Method, Sevilla Powder Tester and new Ball Indentation Method. Powder Technology, 286, 807-816. doi:10.1016/j.powtec.2015.09.010
  • Zhang, L., He, L., Ghadiri, M., & Hassanpour, A. (2015). Effect of surfactants on the deformation and break-up of an aqueous drop in oils under high electric field strengths. Journal of Petroleum Science and Engineering, 125, 38-47. doi:10.1016/j.petrol.2014.11.014

2014

  • Ali, M., Mahmud, T., Heggs, P. J., Ghadiri, M., Djurdjevic, D., Ahmadian, H., Martin de Juan, L,. Amador, C., & Bayly, A. (2014). A one-dimensional plug-flow model of a counter-current spray drying tower. Chemical Engineering Research & Design, 92(5), 826-841. doi:10.1016/j.cherd.2013.08.010
  • Mousavi, S. H., Ghadiri, M., & Buckley, M. (2014). Electro-coalescence of water drops in oils under pulsatile electric fields. Chemical Engineering Science, 120, 130-142. doi:10.1016/j.ces.2014.08.055
  • Pasha, M., Dogbe, S., Hare, C., Hassanpour, A., & Ghadiri, M. (2014). A linear model of elasto-plastic and adhesive contact deformation. Granular Matter, 16(1), 151-162. doi:10.1007/s10035-013-0476-y
  • Wang, Z., Liu, J., Kale, G. M., & Ghadiri, M. (2014). Ion-exchange kinetics and thermal decomposition characteristics of Fe 2+-exchanged alginic acid membrane for the formation of iron oxide nanoparticles. Journal of Materials Science, 49(20), 7151-7155. doi:10.1007/s10853-014-8423-9
  • Zafar, U., Hare, C., Hassanpour, A., & Ghadiri, M. (2014). Drop test: A new method to measure the particle adhesion force. Powder Technology, 264, 236-241. doi:10.1016/j.powtec.2014.04.022
  • Abbas, R. K., Hassanpour, A., Hare, C., & Ghadiri, M. (2014). Instantaneous monitoring of drill bit wear and specific energy as a criteria for the appropriate time for pulling out worn bits. In Proceedings. Astana, Kazakhstan: Society of Petroleum Engineers. doi:10.2118/172269-MS

2013

  • Calvert, G., Curcic, N., Redhead, C., Ahmadian, H., Owen, C., Beckett, D., & Ghadiri, M. (2013). A new environmental bulk powder caking tester. Powder Technology, 249, 323-329. doi:10.1016/j.powtec.2013.08.037
  • Calvert, G., Ghadiri, M., Dyson, M., Kippax, P., & McNeil-Watson, F. (2013). The flowability and aerodynamic dispersion of cohesive powders. Powder Technology, 240, 88-94. doi:10.1016/j.powtec.2012.07.003
  • Calvert, G., Hassanpour, A., & Ghadiri, M. (2013). Analysis of Aerodynamic Dispersion of Cohesive Clusters. Chemical Engineering Science, 86, 146-150. doi:10.1016/j.ces.2012.06.035
  • Hare, C. L., & Ghadiri, M. (2013). Influence of measurement cell size on predicted attrition by the Distinct Element Method. Powder Technology, 236, 100-106. doi:10.1016/j.powtec.2012.04.061
  • Pasha, M., Hare, C., Hassanpour, A., & Ghadiri, M. (2013). Analysis of ball indentation on cohesive powder beds using distinct element modelling. Powder Technology, 233, 80-90. doi:10.1016/j.powtec.2012.08.017
  • Rahmanian, N., Ganimi, T. E., & Ghadiri, M. (2013). Further investigations on the influence of scale-up of a high shear granulator on the granule properties. Particuology, 11(6), 627-635. doi:10.1016/j.partic.2013.02.004
  • Rahmanian, N., & Ghadiri, M. (2013). Strength and structure of granules produced in continuous granulators. Powder Technology, 233, 227-233. doi:10.1016/j.powtec.2012.09.008
  • Zarrebini, A., Ghadiri, M., Dyson, M., Kippax, P., & McNeil-Watson, F. (2013). Tribo-electrification of powders due to dispersion. Powder Technology, 250, 75-83. doi:10.1016/j.powtec.2013.10.006
  • Calvert, G., Curcic, N., & Ghadiri, M. (2013). A mechanistic analysis of bulk powder caking. In AIP Conference Proceedings Vol. 1542 (pp. 417-420). doi:10.1063/1.4811956
  • Hare, C., & Ghadiri, M. (2013). Prediction of bulk particle breakage due to naturally formed shear bands. In AIP Conference Proceedings Vol. 1542 (pp. 487-490). doi:10.1063/1.4811974
  • Hare, C., & Ghadiri, M. (2013). The influence of aspect ratio and roughness on flowability. In AIP Conference Proceedings Vol. 1542 (pp. 887-890). doi:10.1063/1.4812074
  • Imba, M., Kanazawa, T., Ida, J., Yamamoto, H., Ghadiri, M., & Matsuyama, T. (2013). Tribo-electric charging particle in a shaker. In AIP Conference Proceedings, 1542, 90-92. doi:10.1063/1.4811874
  • Pasha, M., Dogbe, S., Hare, C., Hassanpour, A., & Ghadiri, M. (2013). A new contact model for modelling of elastic-plastic-adhesive spheres in distinct element method. In AIP Conference Proceedings Vol. 1542 (pp. 831-834). doi:10.1063/1.4812060
  • Pasha, M., Hare, C., Hassanpour, A., & Ghadiri, M. (2013). Assessing flowability of small quantities of cohesive powder using distinct element modelling. In AIP Conference Proceedings Vol. 1542 (pp. 959-962). doi:10.1063/1.4812092
  • Pasha, M., Hare, C., Ghadiri, M., Piccione, P. M., & Taylor, S. (2013). Analysis of seed processing by the distinct element method. In AIP Conference Proceedings Vol. 1542 (pp. 931-934). doi:10.1063/1.4812085

2012

  • Calvert, G., Ghadiri, M., Dyson, M., Kippax, P., & McNeil-Watson, F. (2012). The flowability and aerodynamic dispersion of cohesive powders. Powder Technology, 240, 88-94. doi:10.1016/j.powtec.2012.07.003
  • Hassanpour, A., Pasha, M., Ghadiri, M., Susana, L., Santomaso, A. C., & Rahmanian, N. (2012). Analysis of seeded granulation in high shear granulators by discrete element method. Powder Technology, 238, 50-55. doi:10.1016/j.powtec.2012.06.028
  • Liu, Y. -H., Calvert, G., Hare, C., Ghadiri, M., & Matsusaka, S. (2012). Size measurement of dry ice particles produced from liquid carbon dioxide. Journal of Aerosol Science, 48, 1-9. doi:10.1016/j.jaerosci.2012.01.007
  • Rahmanian, N., Naji, A., & Ghadiri, M. (2012). Erratum to “Effects of process parameters on granules properties produced in a high shear granulator”  . Chemical Engineering Research & Design, 90(4), 584. doi:10.1016/j.cherd.2011.08.013
  • Šupuk, E., Zarrebini, A., Reddy, J. P., Hughes, H., Leane, M. M., Tobyn, M. J., Timmins, P., &. Ghadiri, M. (2012). Tribo-electrification of active pharmaceutical ingredients and excipients. Powder Technology, 217, 427-434. doi:10.1016/j.powtec.2011.10.059
  • Wang, Z., Kale, G. M., & Ghadiri, M. (2012). Synthesis and characterization of CexGd1-xO2-δ nanopowders employing an alginate mediated ion-exchange process. Chemical Engineering Journal, 198-199, 149-153. doi:10.1016/j.cej.2012.05.063
  • Wang, Z., Kale, G. M., & Ghadiri, M. (2012). Sol-gel production of Ce 0.8 Gd 0.2 O 1.9 nanopowders using sucrose and pectin as organic precursors. Journal of the American Ceramic Society, 95(9), 2863-2868. doi:10.1111/j.1551-2916.2012.05303.x
  • Wang, Z., Kale, G. M., & Ghadiri, M. (2012). Novel ion-exchange process for the preparation of metal oxide nanopowders from sodium alginate. Journal of the American Ceramic Society, 95(10), 3124-3129. doi:10.1111/j.1551-2916.2012.05366.x
  • Wang, Z., Kale, G. M., Yuan, Q., & Ghadiri, M. (2012). X-Ray micro-tomography of freeze dried nickel alginate beads and transformation into NiO nanopowders. RSC Advances, 2(26), 9993-9997. doi:10.1039/c2ra21171h

2011

  • Ahmadian, H., Hassanpour, A., & Ghadiri, M. (2011). Analysis of granule breakage in a rotary mixing drum: Experimental study and distinct element analysis. Powder Technology, 210(2), 175-180. doi:10.1016/j.powtec.2011.03.013
  • Calvert, G., Hassanpour, A., & Ghadiri, M. (2011). Mechanistic analysis and computer simulation of the aerodynamic dispersion of loose aggregates. Chemical Engineering Research & Design, 89(5A), 519-525. doi:10.1016/j.cherd.2010.08.013
  • Chen, H. S., Ding, Y. L., Cong, N. T., Dou, B. L., Dupont, V., Ghadiri, M., & Williams, P. T. (2011). A comparative study on hydrogen production from steam-glycerol reforming: thermodynamics and experimental. Renewable Energy, 36(2), 779-788. doi:10.1016/j.renene.2010.07.026
  • Chen, H. S., Ding, Y. L., Cong, N. T., Dou, B. L., Dupont, V., Ghadiri, M., & Williams, P. T. (2011). Progress in low temperature hydrogen production with simultaneous CO2 abatement. Chem Eng Res Des, 89(9A), 1774-1782. doi:10.1016/j.cherd.2010.06.008
  • Ghadiri, M., Salman, A. D., Hounslow, M., Hassanpour, A., & York, D. W. (2011). Editorial. Special Issue – Agglomeration. Chemical Engineering Research and Design, 89(5), 499. doi:10.1016/j.cherd.2011.03.006
  • Hare, C., Ghadiri, M., & Dennehy, R. (2011). Prediction of attrition in agitated particle beds. Chem Eng Sci, 66(20), 4757-4770. doi:10.1016/j.ces.2011.06.042
  • Hassanpour, A., Tan, H. S., Bayly, A., Gopalkrishnan, P., Ng, B., & Ghadiri, M. (2011). Analysis of particle motion in a paddle mixer using Discrete Element Method (DEM). Powder Technology, 206(1-2), 189-194. doi:10.1016/j.powtec.2010.07.025
  • Mousavichoubeh, M., Ghadiri, M., & Shariaty-Niassar, M. (2011). Electro-coalescence of an aqueous droplet at an oil-water interface. Chem Eng Process, 50(3), 338-344. doi:10.1016/j.cep.2010.09.017
  • Mousavichoubeh, M., Shariaty-Niassar, M., & Ghadiri, M. (2011). The effect of interfacial tension on secondary drop formation in electro-coalescence of water droplets in oil. Chem Eng Sci, 66(21), 5330-5337. doi:10.1016/j.ces.2011.07.019
  • Olusanmi, D., Roberts, K. J., Ghadiri, M., & Ding, Y. (2011). The breakage behaviour of Aspirin under quasi-static indentation and single particle impact loading: Effect of crystallographic anisotropy. International Journal of Pharmaceutics, 411(1-2), 49-63. doi:10.1016/j.ijpharm.2011.03.039
  • Rahmanian, N., & Ghadiri, M. (2011). Comment of the Cover Photograph Seeded Granulation. KONA Powder and Particle Journal, (29), 3. doi:10.14356/kona.2011004
  • Rahmanian, N., Ghadiri, M., & Jia, X. (2011). Seeded granulation. Powder Technology, 206(1-2), 53-62. doi:10.1016/j.powtec.2010.07.011
  • Rahmanian, N., Naji, A., & Ghadiri, M. (2011). Effects of process parameters on granules properties produced in a high shear granulator. Chemical Engineering Research and Design, 89(5), 512-518. doi:10.1016/j.cherd.2010.10.021
  • Šupuk, E., Hassanpour, A., Ahmadian, H., Ghadiri, M., & Matsuyama, T. (2011). Tribo-Electrification and Associated Segregation of Pharmaceutical Bulk Powders. KONA Powder and Particle Journal, 29, 208-223. doi:10.14356/kona.2011022
  • Wang, Z. H., Comyn, T. P., Ghadiri, M., & Kale, G. M. (2011). Maltose and pectin assisted sol-gel production of Ce0.8Gd0.2O1.9 solid electrolyte nanopowders for solid oxide fuel cells. J Mater Chem, 21(41), 16494-16499. doi:10.1039/c1jm12344k
  • Zhang, L., Zhang, K., Ghadiri, M., Hassanpour, A., & Chen, X. (2011). The electrostatic coalescence mechanism of surfactant droplets. Yingyong Jichu yu Gongcheng Kexue Xuebao/Journal of Basic Science and Engineering, 19(6), 877-885. doi:10.3969/j.issn.1005-0930.2011.06.003
  • Zhang, L., Zhang, K., Li, X., Ghadiri, M., & Hassanpour, A. (2011). Electrostatic movement characteristics of droplets in a highly electric field. Shiyou Xuebao/Acta Petrolei Sinica, 32(3), 524-528. doi:10.7623/syxb201103025

2010

  • Dou, B., Rickett, G. L., Dupont, V., Williams, P. T., Chen, H., Ding, Y., & Ghadiri, M. (2010). Steam reforming of crude glycerol with in situ CO(2) sorption.. Bioresource Technology, 101(7), 2436-2442. doi:10.1016/j.biortech.2009.10.092
  • Matsusaka, S., Maruyama, H., Matsuyama, T., & Ghadiri, M. (2010). Triboelectric charging of powders: A review. Chemical Engineering Science, 65(22), 5781-5807. doi:10.1016/j.ces.2010.07.005
  • Olusanmi, D., Wang, C., Ghadiri, M., Ding, Y., & Roberts, K. J. (2010). Effect of temperature and humidity on the breakage behaviour of Aspirin and sucrose particles. Powder Technology, 201(3), 248-252. doi:10.1016/j.powtec.2010.04.003
  • Zhang, L. M., Zhang, K., He, L. M., & Mojtaba, G. (2010). Design, experiment and practical application of high voltage electrostatic coalescer. Gaodianya Jishu/High Voltage Engineering, 36(7), 1797-1802. Retrieved from link
  • Šupuk, E., Hassanpour, A. and Ghadiri, M. 2010. Segregation of Formulated Bulk Powders due to Electrostatic Effects. In: World Congress on Particle Technology WCPT6, 26- 29 April 2010, Nuremberg, Germany. URI: https://eprints.hud.ac.uk/id/eprint/12602

2009

  • Calvert, G., Ghadiri, M., & Tweedie, R. (2009). Aerodynamic dispersion of cohesive powders: A review of understanding and technology. Adv Powder Technology, 20(1), 4-16. doi:10.1016/j.apt.2008.09.001
  • Chen, H. S., Zhang, T. F., Dou, B. L., Dupont, V., Williams, P., Ghadiri, M., & Ding, Y. L. (2009). Thermodynamic analyses of adsorption-enhanced steam reforming of glycerol for hydrogen production. Int J Hydrogen Energ, 34(17), 7208-7222. doi:10.1016/j.ijhydene.2009.06.070
  • Dou, B., Dupont, V., Rickett, G., Blakeman, N., Williams, P. T., Chen, H., Ding, Y. L., & Ghadiri, M. (2009). Hydrogen production by sorption-enhanced steam reforming of glycerol.. Bioresour Technol, 100(14), 3540-3547. doi:10.1016/j.biortech.2009.02.036
  • Fan, X. F., Yang, Z. F., Parker, D. J., Ng, B., Ding, Y. L., & Ghadiri, M. (2009). Impact of Surface Tension and Viscosity on Solids Motion in a Conical High Shear Mixer Granulator. AICHE J, 55(12), 3088-3098. doi:10.1002/aic.11926
  • Ghadiri, M. (2009). The Letter from the Editor. KONA Powder Part J, (27), 1. doi:10.14356/kona.2009003
  • Hassanpour, A., Kwan, C. C., Ng, B. H., Rahmanian, N., Ding, Y. L., Antony, S. J., Jia, X. D., & Ghadiri, M. (2009). Effect of granulation scale-up on the strength of granules. Powder Technology, 189(2), 304-312. doi:10.1016/j.powtec.2008.04.023
  • Ng, B. H., Ding, Y. L., & Ghadiri, M. (2009). Modelling of dense and complex granular flow in high shear mixer granulator-A CFD approach. Chem Eng Sci, 64(16), 3622-3632. doi:10.1016/j.ces.2009.05.011
  • Rahmanian, N., Ghadiri, M., Jia, X., & Stepanek, F. (2009). Characterisation of granule structure and strength made in a high shear granulator. Powder Technology, 192(2), 184-194. doi:10.1016/j.powtec.2008.12.016
  • Supuk, E., Seiler, C., & Ghadiri, M. (2009). Analysis of a Simple Test Device for Tribo-Electric Charging of Bulk Powders. Part Part Syst Char, 26(1-2), 7-16. doi:10.1002/ppsc.200800015
  • Ahmadian, H., Hassanpour, A., Antony, S. J., & Ghadiri, M. (2009). Mechanical Failure of Grains in Sheared Granular Media: Effects of size ratio. In Powders and Grains 2009. Powders and Grains 2009.
  • Calvert, G., Hassanpour, A., & Ghadiri, M. (2009). Mechanistic Analysis and Computer Simulation of the Aerodynamic Dispersion of Loose Aggregates: Effect of Surface Energy. In M. Nakagawa, & S. Luding (Eds.), Powders and Grains 2009 Vol. 1145 (pp. 1047-1050).
  • Chen, H. S., Cong, T., Zhang, T., Fang, L., Ghadiri, M., Ding, Y. L., . . . Williams, P. (2009). Thermodynamic analysis on adsorption enhanced steam reforming of glycerol for hydrogen production. 8th World Congress of Chemical Engineering: Incorporating the 59th Canadian Chemical Engineering Conference and the 24th Interamerican Congress of Chemical Engineering.
  • Hare, C. L., Ghadiri, M., Dennehy, R., & Collier, A. (2009). Particle Breakage in Agitated Dryers. In M. Nakagawa, & S. Luding (Eds.), Powders and Grains 2009 Vol. 1145 (pp. 851-854).
  • Hassanpour, A., Eggert, M., & Ghadiri, M. (2009). Analysis of Segregation of Binary Mixtures of Particulate Solids. In M. Nakagawa, & S. Luding (Eds.), Powders and Grains 2009 Vol. 1145 (pp. 687-690).
  • Matsuyama, T., Supuk, E., Ahmadian, H., Hassanpour, A., & Ghadiri, M. (2009). Analysis of Tribo-Electric Charging of Spherical Beads Using Distinct Element Method. In M. Nakagawa, & S. Luding (Eds.), Powders and Grains 2009 Vol. 1145 (pp. 127-130).
  • Rahmanian, N., Ghadiri, M., Ding, Y. L., & Jia, X. D. (2009). Effect of Primary Particle Size on the Granule Properties. In M. Nakagawa, & S. Luding (Eds.), Powders and Grains 2009 Vol. 1145 (pp. 255-258).

2008

  • Ghadiri, M., Ocone, R., & Forssberg, E. (2008). Particle technology. Chem Eng Res Des, 86(4A), 327. doi:10.1016/S0263-8762(08)00087-7
  • Hassanpour, A., Antony, S. J., & Ghadiri, M. (2008). Influence of interface energy of primary particles on the deformation and breakage behaviour of agglomerates sheared in a powder bed. Chem Eng Sci, 63(23), 5593-5599. doi:10.1016/j.ces.2008.08.008
  • Hassanpour, A., Kwan, C. C., Rahmanian, N., Ding, Y., Antony, S. J., Jia, X., & Ghadiri, M. (2008). Effect of Granulation Scale-Up on the Structure and Strength of Granules. Powder Technology, 189, 304-312. doi:10.1016/j.powtec.2008.04.023
  • Matsusaka, S., Fukuda, H., Sakura, Y., Masuda, H., & Ghadiri, M. (2008). Analysis of pulsating electric signals generated in gas-solids pipe flow. Chem Eng Sci, 63(5), 1353-1360. doi:10.1016/j.ces.2007.07.010
  • Ng, B. H., Ding, Y. L., & Ghadiri, M. (2008). Assessment of the kinetic-frictional model for dense granular flow. In Particuology Vol. 6 (pp. 50-58). doi:10.1016/j.cpart.2007.10.002
  • Ng, B. H., Ding, Y. L., & Ghadiri, M. (2008). On the relative importance of the kinetic and frictional contributions to granular motion in an annular Couette flow. Chem Eng Sci, 63(6), 1733-1739. doi:10.1016/j.ces.2007.11.039
  • Ng, B. H., Kwan, C. C., Ding, Y. L., Ghadiri, M., Fan, X. F., & Parker, D. J. (2008). Granular flow fields in vertical high shear mixer granulators. AICHE J, 54(2), 415-426. doi:10.1002/aic.11389
  • Rahmanian, N., Ghadiri, M., & Ding, Y. (2008). Effect of scale of operation on granule strength in high shear granulators. Chem Eng Sci, 63(4), 915-923. doi:10.1016/j.ces.2007.10.027
  • Rahmanian, N., Ng, B., Hassanpour, A., Ding, Y., Antony, S. J., Jia, X., Ghadiri, M., van der Wel, P., Krug-Polman, A., York, D., Bayly, A., & Tan, H. S. (2008). Scale-up of high shear mixer granulators. KONA Powder and Particle, 26, 190-204. doi:10.14356/kona.2008017
  • Samimi, A., & Ghadiri, M. (2008). Producion of Nanoparticle Assemblies by Electro-Spraying and Freeze-Drying of Colloids: A New Method to Resolve Handling Problem of Nanoparticles. Iran J Chem Chem Eng, 27(2), 69-79.
  • Wang, C., Hassanpour, A., & Ghadiri, M. (2008). Characterisation of flowability of cohesive powders by testing small quantities of weak compacts. Particuology, 6(4), 282-285. doi:10.1016/j.partic.2008.05.004
  • Šupuk, E., A Hassanpour, Seiler, C., M. Ghadiri 2008. An analysis of a simple test device for tribo-charging of bulk powders. URI:https://eprints.hud.ac.uk/id/eprint/12608

2007

  • Watanabe, H., Ghadiri, M., Matsuyama, T., Ding, Y., Pitt, K., Maruyama, H., Matsusaka, S. and Masuda, H., (2007). Triboelectrification of pharmaceutical powders by particle impact. International Journal of Pharmaceutics, 334(1-2), 149-155.
  • Watanabe; H., Ghadiri, M., Matsuyama, T., Ding, Y.-L., Pitt, K.G. 2007. New instrument for tribocharge measurement due to single particle impacts. Rev Sci Instrum 78. 024706.
    https://doi.org/10.1063/1.2671585.

2006 and earlier

  • Matsusaka, S., Ghadiri, M., Masuda, H. 2000. Electrification of an elastic sphere by repeated impacts on a metal plate. Journal of Physics D: Applied Physics, 33, 2311. iopscience.iop.org. DOI: 10.1088/0022-3727/33/18/316.